Swarovski Optik presents the Z3 - the natural successor to their successful AV riflescope series. The Z3 sports a 1.0" tube with an impeccable scratch-resistant anodized exterior, and the tube's interior is finished with a finely machined microstructure surface to reduce residual reflections. The Z3's trim profile offers a clean unobtrusive look. The field of view is crisp, wide, and rich with fine detail.
The Z3 3-10x42 concentrates on the essentials - it's light, compact, and reliable. The entire scope is fully water and fogproof thanks to a meticulous nitrogen-purging process. The low-profile turrets offer ¼ MOA click-stop corrections, and the quadratic adjustment range provides a generous 50 MOA for both windage and elevation correction. The lenses have been fully multicoated to optimize light transmission, and the external lens surfaces have been treated with a scratch-resistant SWARODUR protective coating.
This Z3 riflescope is configured with a 1.0" tube, and a BRX Fine reticle in the second focal plane. The parallax correction is factory preset at 219 yd/200 m.
Reticle | |
---|---|
Reticle Type | BRX Fine Reticle |
Features | |
---|---|
Filter Thread | M44 x 0.75 |
Impact Point Correction | 1/4 MOA per Click |
Windage Adjustment | 50 MOA |
Elevation Adjustment | 50 MOA |
Parallax Correction | Yes, 219 yd / 200 m |
Environmental | |
---|---|
Water Resistance | Waterproof |
Fogproof | Yes |
General | |
---|---|
Maintube Diameter | 1" |
Battery | None |
Dimensions | Length: 12.6" / 31.6 cm |
Weight | 0.8 lb / 360 g |