Made in America, Talley Manufacturing’s Tikka T3 Picatinny Rails are machined entirely from high grade 7000 series alloy and protected with a matte black hard-coat anodizing to 65 Rockwell ensuring the craftsmanship of these Picatinny Rails last the lifetime of your firearm. The Tikka T3 Picatinny Rails are all designed and manufactured with precision to fit your Tikka rifle with the industry’s tightest manufacturing tolerances.
Talley’s Tikka Pic Rails provide a mounting platform for all optics mounts that have been designed in accordance with the MIL-STD-1913 Pic Rail specifications, to include all Talley Picatinny scope mounts.
- American Made, Lightweight 7000 series Aluminum Alloy
- Fully CNC Machined
- Hard-coat anodizing to 65 Rockwell
- Designed in accordance with the MIL-STD-1913 Pic Rail specifications
- Available in 0 and 20MOA. Full Length and Now Shortened “Action Length”
- Includes mounting screws and wrench. (1/4 6-48 Screws / T-15)
- Designed to fit Tikka T3 and Tikka T3X bolt action rifles.
Tikka T3 Picatinny Rail – Product Dimensions and Weights
Length / MOA | Rear Height1 | Hole2 1 ↔ 2 | Hole 2 ↔ 3 | Hole 3 ↔ 4 | Front Height3 | Overall Length | Weight |
Standard / Standard | .380″ | .862″ | 3.246″ | .862″ | .380″ | 7.46″ | 2.4oz. |
Standard /20MOA | .380″ | .862″ | 3.246″ | .862″ | .350″ | 7.46″ | 2.3oz. |
Action Length / Standard | .380″ | .862″ | 3.246″ | .862″ | .380″ | 6.29″ | 2.2oz. |
Action Length /20MOA | .380″ | .862″ | 3.246″ | .862″ | .350″ | 6.29″ | 2.1oz. |
1 The Rear height is measured at hole 1; from the top of the action to the top of the rail.
2 Hole 1 is closest to the shooter and hole 4 is closest to the muzzle. Hole spacing measured center to center.
3 The Front Height is measured at hole 4; from the top of the action to the top of the rail.
Torque Recommendations for the Tikka T3?
- Tikka T3 Picatinny Rail to Action: Torque can depend on the receiver. Please check with the rifle manufacturer (Tikka) to verify allowable torque into receiver. Always make sure your torque wrench is calibrated, Talley Mfg is not responsible for damage caused to scopes or firearms due to over torquing
Should I use Loctite on my Tikka T3 pic rail?
- Although not always necessary, using Loctite for the screws going in the receiver is perfectly fine. We do not recommend using anything stronger than Loctite Blue 242. We do not recommend using Loctite on the ring screws. Always test fit before applying any Loctite.