Adjust the canting of your scope using the low Burris Optics XTR Signature Rings for Riflescopes. These rings accept 34mm maintubes, fit Picatinny/Weaver bases and rails, and hold the center of the scope 1" above the top of a rail or base. To assist you with canting, the rings include five pairs of Pos-Align inserts for 5, 10, 15, 20, 25, 30, and 40 MOA corrections. The inserts also help with centering and maximum scope-to-ring contact to increase gripping power without scratching your scope's finish. The rings can also be used to correct misalignment caused by off-center receiver holes or bases. The dual steel clamps with a full cross-through connection assure proper centering on Picatinny rails and add extra strength to the assembly.
- For 34mm maintubes
- Self-centering dual steel clamps assure proper centering on Picatinny/Weaver rails
- Pos-Align inserts
- Allow for centering
- Provide solid scope-to-ring holding power
- Doesn't scratch scope's finish
- Five pairs of inserts included for a maximum of 40 MOA adjustment:
- 2 x ±0 MOA inserts
- 2 x ±5 MOA inserts
- 2 x ±10 MOA inserts
- 4 x ±20 MOA inserts
- The inserts allow making 5, 10, 15, 20, 25, 30, and 40 MOA corrections
- Allow sighting without disturbing your scope's adjustments
- Correct misalignment caused by off-center receiver holes and bases
- Eliminate a need for tapered bases or shimming for long distance shooting
- Aluminum construction with dual steel clamps
Maintube Diameter - 34 mm
Height - Base to Scope Center: 1.5"
Cap Screws- 6 (per Ring)
Material - Aluminum, Steel
