Prophet River Firearms

• Drop in for Remington 700, short action, "M5 detachable magazine" and varmint barrel contour
• Designed to be free floated
• Adjustable cheek piece .5 inch below boreline in down position with 1.125 inch total upward adjustment
• Cheek piece posts incorporate .125 inch spaced e-clip positions for quick removal and replacement without losing the desired set height
• Computer designed and CNC machined full length 6061-T6 aluminum bedding system extends through forearm for strength and stiffness. An additional aluminum "tail piece" extends from the bedding block through the grip area for even more strength and rigidity
• 1 inch Pachmayr decelerator recoil pad
• 2 front sling studs and 1 rear sling stud
• 13.75 inch length of pull
• 32.25 inch overall stock length
• 2.5 inch forearm width
• Approximately 3.5 pounds
• #2015_aluminum bedding block

             -Set up and cast in place with web thickness (pillar height) of front: .735" +0/-0.10" and rear: 1.085" +0/-.010"

             -Slightly longer pillar height due to long latch levers & magazine lip profile which may result in mag to bolt drag

             -Slightly longer pillar height also ensures assembled components do not yield web thickness shorter than manufactures suggestion of .720" & 1.070"

             -Slightly longer pillar height can be adjusted shorter if necessary

• Recommended detachable mag housings:

             -Badger ordnance #306-82 and American Precision Arms #RTG/SA

             -Both of the above come with documentation, action screws, & aluminum pillars (not needed with the #2015 stock due to aluminum chassis already present) set at front web thickness of .720" and rear web thickness of 1.070"

             -NOTE: There are other manufactures of quality detachable magazines housings. It is up to you to ensure that it is compatible with the "M5" footprint

• Recommended magazines:

             -Accuracy international (A1), 5 round #3901 or 10 round #3902

             -Accurate Mag, 5 round #00100-0007 or round #00100-0009

• Common issues associated with aftermarket detachable magazine housings and magazines. Consult a gunsmith if you have reservations on fitting the components together

             -Some magazine housing latches vary. This effects where the magazine sets and how rounds are picked up

             -Magazine lips can and often do need to be adjusted or massaged for proper feed/operation

             -Supplied action screws often require the person assembling the components to cut the screws to length. Be careful that your cut threads are dressed properly so not to disrupt the action threads